Using Better Bottles makes the old carboy-brush relatively useless since the plastic is susceptible to scratching. While PBW mostly eliminates fermentation build-up on the inside of the Better Bottle, I've had two instances where a chemical clean was not good enough. I needed to attach a small rag to my lees stirrer to gently rub away the stubborn gunk that PBW was unable to remove. Perhaps this would be a better solution for every cleaning!?
1/4″ 0-60 PSI Pressure Gauge… $7.99 + Spunding Valve Build
-
MEASUREMAN 2-1/2inch Dial Size, Liquid Filled Pressure Gauge, 0-60psi/kpa,
304 Stainless Steel Case, 1/4inNPT Lower Mount I use a […]
1 month ago
Posts
Thats nifty, I do most all my wine making in Better Bottles. I usually rinse with a Jet Carboy Washer, soak with PBW for 12-24hrs and then rinse again with the Jet. Seems to do the trick for me, but I know beer precipitate can be a pita.
ReplyDeleteFound another link where you can just buy the pads. If you're making wine, you probably already have a lees stirrer. You can simply remove the plastic stir ends and put the pads on. I know you rarely have stubborn buildup but it might be nice to have the pads just in case. I've had times when a 24+ hour soak just couldn't release all the gunk.
ReplyDelete